BLD1 is a Battery Failure Detection sensor that measures H2 concentration when different battery leakage occur through CAN communication.
The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode.
BLD1 solution allow Battery Management System (BMS) to monitor the safe operation of the battery and send an earlier signal during a thermal runaway warning to give time to passengers to leave the vehicle safely.
Fast response time (<1 second)
Thermal conductivity gas sensor (high reliability technology)
High H2 range detection from 0 up to 10%
Low power consumption (25mA)
CAN 500kbps High Speed communication
Standard automotive 4 pins connector
Watertight housing IP6K7
There are different failure mode during the battery life time that could occur in an Electric Vehicle.
To prevent any injury to the passengers, one solution is to send an alarm as soon as possible to the passenger to leave the car when there is any leakage detection.
Our senor is able to detect the hydrogen gas during a thermal runway and all the failure mode compare to a pressure sensor that could detect just some of them.
In addition, the pressure sensor can’t work in all the battery pack architectures (with a venting solution there is more or less no pressure increase detectable)